摩登犀牛

标题: T-Splines 3.3 beta版 [打印本页]

作者: new 时间: 2012-5-3 17:59
标题: T-Splines 3.3 beta版
有道译文
新增特征:
。Retopology啪的一声(图标在编辑模式中保持清醒的头脑显示)。当这个,然后抓住T-Splines会断掉到最近的对象在场景里。
。下面的命令响应retopology啪的一声:移动顶点/边缘/面临机械手。tsAppend,tsExtrude,tsInsertEdge,
。tsSubdivideFace,tsInsertPoint,tsSlide
。tsAppend大有好转与新的选择和行为
。新tsBevel工具
。tsInsertEdge有一个新的选择让你指定一个确切的距离(沿控制多边形),将新边沿会插入。
。新tsSlide命令让你幻灯片边缘沿控制多边形的形状
。SetPivot抓取现在允许您设定取向机械手的位置。随着它
。新的选择命令:选择下一个循环,以前的环,然后你,下伏
。新tsUVEditor命令
。T-Splines现在工作对犀牛的CageEdit命令
。tsSkin完全重写
。tsLoft完全重写
。编辑模式现在显示界面更图标和入库默认。
。老v2 transluscent盒的住房和城市发展部已经更新到新v3项目和工作现在称为文本视窗界面。
。当tsExtruding脸部或一个边,你不再需要撤销来抵消两次运动和挤压。只是撤消一次!注意:当你
。挤出一条曲线,你仍然需要撤销两次。
。tsSymmetry有更清晰的命令行提示
。tsInsertPoint有更一致的选择
。tsPipe有新的钻石的关节
。现在正确地处理tsPull移动移动时接触点
。现在有了正确的处理tsBridge让你改变扭曲和方向的桥梁
。新tsExtractEdges命令

原文
新增特征:
. Retopology snap (icon is in the edit mode heads up display). When this is on, then T-Splines grips will snap to the closest object in the scene.
. The follow commands respond to retopology snap: moving vertices/edges/faces with the manipulator. tsAppend, tsExtrude, tsInsertEdge,
. tsSubdivideFace, tsInsertPoint, tsSlide
. tsAppend is greatly improved with new options and behavior
. New tsBevel tool
. tsInsertEdge has a new option to let you specify an exact distance (along the control polygon) where the new edge will be inserted.
. New tsSlide command lets you slide edges along the control polygon
. The manipulator SetPivot now allows you to set the orientation of the manipulator along with its position
. New selection commands: Select next loop, previous loop, Next U, Next V
. New tsUVEditor command
. T-Splines now works with Rhino’s CageEdit command
. tsSkin completely rewritten
. tsLoft completely rewritten
. The Edit mode HUD now shows more icons and is docked by default.
. The old v2 transluscent box HUD has been updated to work with new v3 items and is now called Text Viewport HUD.
. When tsExtruding a face or an edge, you no longer need to undo twice to undo the movement and the extrusion. Just undo once! Note: when you
. extrude a curve, you will need to still undo twice.
. tsSymmetry has more clear command line prompts
. tsInsertPoint has more consistent selection
. tsPipe has new diamond joints
. tsPull now properly moves tangency handles when it moves vertices
. tsBridge now has the proper handles to let you change the twist and direction of the bridge
. New tsExtractEdges command

下载插件T-Splines Autodesk犀牛的软件
T-Splines Autodesk插件犀牛软件将通过数字下载。重新安装插件T-Splines Autodesk犀牛在你的电脑,你可以在这里下载最新的版本。你需要犀牛4 SR 8(或后)或犀牛5 2011-06-29(32或64位)或之后T-Splines安装运行。

v 3.3目前的生产版本
发布2012年2月9

Autodesk_T-Splines_Plug-in_For_Rhino_3.3_r8031_32.msi

下载:犀牛4(21 MB)
犀牛五32位(21 MB)
犀牛5 64位(21 MB)

作者: df8399 时间: 2012-5-14 07:10
有破解补丁么

作者: vzcg5405 时间: 2012-11-17 00:31
good stuff...
thanks a lot

欢迎光临摩登犀牛 (http://www.rhino3d.us/)