摩登犀牛
标题: Autodesk T-Splines Plug-in for Rhino v3.3 32位升级补丁首发 [打印本页]
作者: new 时间: 2012-2-13 12:04
标题: Autodesk T-Splines Plug-in for Rhino v3.3 32位升级补丁首发
切勿用于商业用途,本人只是转帖,如果喜欢这个软件,建议购买正版软件
Autodesk T-Splines v 3.3 for Rhino 终于发布更新
Autodesk T-Splines Plug-in for Rhino v3.3 is now available.
If you already own a T-Splines v3 license, this is a free upgrade. You can download the update here.
You can learn more about the new and improved features of this version in the Help file inside Autodesk T-Splines Plug-in for Rhino. Here are the highlights:
New features
tsRetopo will snap T-Splines control points to the closest mesh or polysurface in the scene, in the following commands: append, extrude, insert edge, insert point, subdivide face, bevel, and slide edges.
tsBevel Replaces selected edges with a channel of faces.
tsSlide Slides selected edges along neighboring edges
New selection commands: Select next loop, previous loop, Next U, Next V
tsUVEditor lets you edit the UV layout of textures applied to T-Splines and T-Spline render meshes.
tsExtractEdges: Extracts the selected edges from the T-Splines surface. Similar to the Rhino ExtractIsocurve command.
Improved features
tsAppend is greatly improved with new options and behavior
tsInsertEdge has a new option to let you specify an exact distance (along the control polygon) where the new edge will be inserted.
tsEditMode SetPivot now allows you to set the orientation of the manipulator along with its position
T-splines now work with Rhino’s CageEdit command
tsSkin has been completely rewritten
tsLoft has been completely rewritten
tSEditMode Heads-Up Display (HUD) now shows more icons and is docked by default.
The old v2 transluscent box HUD has been updated to work with new v3 items and is now called Text Viewport HUD.
When tsExtruding a face or an edge, you no longer need to undo twice to undo the movement and the extrusion. Just undo once! Note: when you extrude a curve, you will need to still undo twice.
tsSymmetry has more clear command line prompts
tsInsertPoint has more consistent selection
tsPipe has new diamond joints
tsPull now properly moves tangency handles when it moves vertices
tsBridge now has the proper handles to let you change the twist and direction of the bridge
下载链接:
For Rhino 4:
http://tsplin.es/3-3-32
For Rhino 5 32-bit:
http://tsplin.es/3-3-32
For Rhino 5 64-bit:
http://tsplin.es/3-3-64
作者: pwithl 时间: 2012-2-13 12:49
看看什么东西
作者: RGB 时间: 2012-2-13 13:04
但是公司的公司股改时
作者: 咖啡和糖 时间: 2012-2-13 13:06
我就知道,跟Autodesk合并后,TS肯定不会放弃Rhino的
作者: simonchen 时间: 2012-2-13 13:16
本帖最后由 simonchen 于 2012-2-13 16:14 编辑
{:soso_e114:}{:soso_e127:}{:soso_e137:}{:soso_e127:}{:soso_e127:}{:soso_e127:}
作者: wujianfu814 时间: 2012-2-13 13:19
等了很久~~和谐文件还没出!!!{:soso_e122:}
作者: liusixiong 时间: 2012-2-13 14:44
kankan ............
作者: 死神之魂 时间: 2012-2-13 15:02
看看................
作者: Kevin_Dai 时间: 2012-2-13 16:11
还在用2.2的。。
作者: 良知良能 时间: 2012-2-13 17:39
那我以前用的“随意”汉化的TS-3.2能用这个补丁吗
作者: 朱单靖devil 时间: 2012-2-13 18:06
看看先~已经被Autodesk公司收购了么?
作者: 故李将军 时间: 2012-2-13 23:14
看看什么东西
作者: fengyun319 时间: 2012-2-14 08:46
for rhino ???
看下!
作者: 小霸王 时间: 2012-2-14 13:47
ts转投autodesk啦!!
作者: 达能`凯瑟宾 时间: 2012-2-14 14:15
………………
作者: openbt 时间: 2012-2-17 10:16
謝謝分享,來試試看。
作者: 11y22y 时间: 2012-2-17 14:43
有什么不同吗....
作者: 黑犀 时间: 2012-2-20 23:17
终于有动作了,呵呵呵
作者: teayang 时间: 2012-2-21 10:08
好东西,我也要来支持下!
作者: 邂逅阳光 时间: 2012-2-21 17:29
...............
作者: 愚的 时间: 2012-2-21 17:47
我来了00000000000
作者: toryyu 时间: 2012-2-21 21:51
看看先。。。。
作者: maya3d4d 时间: 2012-2-23 01:59
看看什么东西
作者: 豌豆℡ 时间: 2012-2-23 11:12
·································
作者: leonkeh 时间: 2012-2-23 14:37
hao好好好
作者: yshaochen 时间: 2012-2-24 09:24
看看,谢谢LZ
作者: finding136977 时间: 2012-2-24 09:38
好东西,谢谢
作者: zhujiao 时间: 2012-2-25 16:12
谢谢分享啊。。。
作者: 速溶咖啡 时间: 2012-2-26 21:54
好~~~~~~~·
作者: devistai 时间: 2012-2-26 22:10
作者: xiaobai 时间: 2012-2-27 11:03
看看看。。。。。
作者: dxf999 时间: 2012-2-27 11:13
感谢分享{:soso_e181:}
作者: aquafeel 时间: 2012-2-28 07:24
看看先~已经被Autodesk公司收购了么
作者: tony 时间: 2012-2-29 22:43
kankan............................
作者: kei2001 时间: 2012-2-29 22:49
感谢分享,好东西
作者: littlelego 时间: 2012-2-29 23:15
这个必须顶!!!
作者: vincent_id 时间: 2012-3-1 09:21
什么补丁,修改了神马?
作者: wuliaop3 时间: 2012-3-1 10:01
kiluiliolioliolio
作者: langhenps 时间: 2012-3-1 10:21
看看
作者: panaone 时间: 2012-3-3 10:16
有crk么?{:soso_e128:}
作者: mac_1 时间: 2012-3-3 14:24
什么!已经被Autodesk公司收购了!!
作者: 彬仔(1.0) 时间: 2012-3-3 16:40
谢谢分享!!!
作者: Vitas_10 时间: 2012-3-3 23:11
看看再说 谢谢
作者: 33333333 时间: 2012-3-4 12:55
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
作者: 飞翔之鱼 时间: 2012-3-5 13:38
看看什么东西
作者: ivan2000i 时间: 2012-3-5 21:40
非常感谢!
作者: 转基因铅笔 时间: 2012-3-6 16:00
我连什么时候3.0出来了都不知道。
作者: PIG头先生 时间: 2012-3-6 20:05
能不能和之前随意的兼容?
作者: silens 时间: 2012-3-7 13:33
ts转投autodesk啦!!
作者: woyaofei888666 时间: 2012-3-7 14:45
看看是啥好东西
作者: lws2008lws 时间: 2012-3-7 17:02
看看看看........
作者: 豫东一枝花 时间: 2012-3-7 20:00
Autodesk合并后,TS肯定不会放弃Rhino的
作者: 少尉 时间: 2012-3-10 09:40
好东西
作者: 落叶De追忆o. 时间: 2012-3-10 10:30
看看好东西
作者: sidney 时间: 2012-3-12 14:58
看看这个有没有用
作者: 我是一只狗熊 时间: 2012-3-12 18:52
真的吗?/好动好东西
作者: 蓝尘 时间: 2012-3-12 23:46
看下…………………………可以用不?
作者: outhen 时间: 2012-3-13 19:59
好东西··顶一个····
作者: sidney 时间: 2012-3-14 13:12
好东西看看
作者: Crazy_Discovery 时间: 2012-3-15 20:22
感谢分享,学习
作者: chester1231 时间: 2012-3-16 00:31
升级能用么啊
作者: 狼图腾xlp 时间: 2012-3-16 08:14
唯馀踏青伴有特供
作者: 松婆 时间: 2012-3-16 10:34
可可可可可可可可可可可可可
作者: 艺能设计 时间: 2012-3-16 12:54
好东西啊。。。看看
作者: michaelll 时间: 2012-3-18 11:07
aaaaaaaaaaaaaaaaaa
作者: nihaoluomin 时间: 2012-3-19 12:34
顶起!!!!!!!!!!1
作者: Mr.Prince 时间: 2012-3-19 23:09
看一下更新情况
作者: minge458 时间: 2012-3-20 17:22
{:soso_e160:}
作者: realman2 时间: 2012-3-20 21:31
T-Splines!!! ...
作者: 杨! 时间: 2012-3-20 23:13
哇~~~感谢~收藏之~~~
作者: stjackin 时间: 2012-3-24 10:29
autodesk 居然是autodesk,为什么不是mcneel.这么好的东西,mcneel应该合并下来才是。
作者: sdlvzh 时间: 2012-3-26 13:31
thcccccccccccccccccccc
作者: γ一生有你π 时间: 2012-3-28 00:17
看啊看那 不错啊
作者: cj4615 时间: 2012-3-28 22:54
来看看~~~~~
作者: ╰つ_希..... 时间: 2012-3-29 11:02
看下 什么东西啊
作者: 聿mi 时间: 2012-3-29 11:32
kankan dasdad
作者: 常瑞 时间: 2012-3-29 11:41
快快快快快快快快快快快快快快快快快快快快快快快快快快快快快
作者: 蓝色大水缸 时间: 2012-3-30 09:00
直接升级就可以吗?
作者: 612165 时间: 2012-3-30 10:23
hhhhhhhhhhhhhhhhhh
作者: 江小鱼 时间: 2012-3-30 14:09
什么情况!!!
作者: 流动名匠 时间: 2012-3-30 17:28
xiexieisiixixixixi
作者: casamoller 时间: 2012-3-30 17:29
顶楼主 谢谢分享
作者: 雪绯月 时间: 2012-3-30 17:41
看看看看
作者: biglin0929 时间: 2012-4-1 21:39
感謝分享!!!!回家試試!
作者: ■□菲_晓渔 时间: 2012-4-1 21:41
我想学它~~~
作者: yiecool 时间: 2012-4-1 23:09
什么东西啊 看看先
作者: abomb 时间: 2012-4-3 06:24
看看什么东西
作者: 远水遥岑 时间: 2012-4-4 18:45
学习学习、;;;;;
作者: naolbu 时间: 2012-4-5 17:50
hao dongxi a
作者: 郑继峰 时间: 2012-4-8 15:34
感谢分享~~~
作者: xiaosun 时间: 2012-4-9 13:21
gdsmmmmmmmmmmmmmmmmmmmmmmmmm
作者: ashes13 时间: 2012-4-9 13:42
谢谢分享,找了好久了
作者: 孙智伟 时间: 2012-4-9 15:39
很好很强大 下载了
作者: 放逐天际 时间: 2012-4-9 22:58
我是来学习的
作者: mdjcad 时间: 2012-4-10 15:21
这个好东西
作者: GUO 时间: 2012-4-10 23:13
{:soso_e129:}
作者: 蒯鼎 时间: 2012-4-10 23:24
这是虾米?~~~~~
作者: roxin 时间: 2012-4-11 08:44
啥时候有个学习文件呢...
作者: xchj81 时间: 2012-4-11 10:11
看看什么东西
作者: hskcool 时间: 2012-4-11 16:59
破解了吗?
欢迎光临 摩登犀牛 (http://www.rhino3d.us/) |
Powered by Discuz! X3.2 |